skip to main |
skip to sidebar
Right from the get-go, I have to bump Maurice Ribble, the inventor and creator of the Camera Axe system. He single-handedly designed, acquired parts for, and began distributing this system online. Check out the Camera Axe site for more details. What it is is a controller with a number of sensors and cables that can be attached to it. I personally just got the projectile sensor, which allows you to precisely place a projectile of any kind in your frame. Just hook up the sensor to the Camera Axe, hook up a flash to the Camera Axe as well, align the barrel of your projectile-launcher (I use a pellet gun from Walmart) so the pellet will pass through the sensor, and fire. The Camera Axe receives its information from the sensor and triggers the flash at exactly the right time, freezing your projectile and exposing your picture.
After receiving my Camera Axe in the mail today, I had my electronics-whiz little brother assemble it for me and then experimented with a friend and my brother for a couple of hours. Here's the best of our results from tonight:

Aperture: f/8
Shutter Speed: 3.2 seconds (1/50,000th effective)
ISO: 400
Focal Length: 50mm
Tripod

Aperture: f/4
Shutter Speed: 4 seconds (1/50,000th effective)
ISO: 200
Focal Length: 50mm
Tripod
Pretty rad. I'm particularly happy with the card shot. Looking forwards to taking pictures of shooting all sorts of stuff in the future.
I know that first part sounded like a commercial. Don't worry, Maurice Ribble isn't paying me. The Camera Axe really just is that awesome. Go buy one.
I didn't think I would be doing one of these posts, but I got the idea of assembling a set of my own personal favorite photographs I took during 2010 from another user on Flickr.
At the end of February this year, I will be leaving on a two-year mission for the LDS church to Samara, Russia, and the surrounding area. Before then I will have to sell my beloved DSLR. It will be interesting to see what kind of work I can produce in Russia with my old PowerShot A590 IS on my weekly preparation day. I did some work I was quite happy with using the PowerShot. It's a fantastic and solid little camera.
Without further ado, here is my best work from 2010, presented in slideshow format.
I want to take this opportunity to be cliché and thank everyone who has, at one point or another, read my blog. Here's to a successful couple of months, and then hopefully a successful two years of Russian photography!
2011, here I come.
I recently took my camera down to the Sandy Aquarium not too far from where I live. Despite bringing some of the fastest glass I have access to (50mm f/1.4, 85mm f/1.8, 100mm f/2.8 Macro), I was maxing out my skills at holding a camera steady, even on a monopod at 1600 ISO.
Many aspects of my photography still have a "trial & error" approach, but I can't remember the last time I shot so many pictures with such a low percentage of keepers. I think I had 2.5 keepers from the close to 200 shots I took.
Along the way, I learned a few valuable lessons about aquatic photography that I figure I'll pass along to you guys. But first, the pictures.

Aperture: f/2.8
Shutter Speed: 1/160
ISO: 1600
Focal Length: 100mm
Monopod

Aperture: f/4
Shutter Speed: 1/30
ISO: 1600
Focal Length: 100mm
Monopod
The first thing I picked up pretty quickly was that you need support. I am somewhat of a perfectionist with the technical aspects of my photography. Therefore, high ISO settings, motion blur, etc. really bother me. I don't like shooting at ISO 1600 when I can avoid it, but I couldn't here. A tripod really would have been the best choice, but I didn't bring mine. A monopod was a fair tradeoff. Even with really fast glass and a maxed-out ISO setting, I was getting barely usable shutter speeds for most of the aquariums. The other tip I can give you is to use a rubber lens hood. This enables you to support the end of your lens against the glass of the aquarium, giving you a couple of advantages. First, it's another point of support, turning your monopod into a bipod. Second, if you're shooting perpendicular to the glass (more on this later), it blocks out light from the edges and helps prevent glare.
Another important aspect to pay attention to is white balance. The different aquariums all had radically different lighting. Definitely shoot RAW. I left my WB on Sunny and just fixed the keepers later in Lightroom. If you are going to shoot JPG, try a few different settings on each aquarium to see what works best for the image you're trying to achieve.
Focusing was the most frustrating aspect for me to get down during the shoot. There was rarely enough light in the aquariums even for my USM AF drives to lock onto something. I ended up manually focusing most of the time. I was continually finding myself unable to achieve sharp focus at all, even on completely static subjects. Eventually I figured out that any kind of curved glass is likely going to nuke your ability to achieve perfect focus. On aquariums with flat glass, you have to shoot as close to perpendicular through the glass as possible. The steeper the angle you are trying to shoot through, the more the glass is distorting things and it doesn't take long to ruin your ability to achieve perfect focus.
So to sum things up:
-Shoot supported, using a rubber lens hood if possible.
-Pay attention to WB.
-Focus manually whenever necessary.
and
-Shoot through glass at a 90° angle whenever possible.
Happy shooting!